DE
EN
Products
Tie Rods for Marine Structures
Anchorings
Horizontal tie-rods
Tie Bar Connections
Fittings
Micropiles
Walings
Walings and Splice Connections
Waling Bolts
Design Guidelines for Dead-Man Tie Rods
Overview
Anchor tie bars
Design Considerations
Relevant Design Information
Typical Tie Bar Configurations and Connections
Tie rod site assembly & installation
Tie Rod Design Example
Quay Wall Accessories
Bollards
Seeport 50 - 3000 kN
Double Bollards 500 - 3000 kN
Rotterdam 300 - 2500 kN
DIN 19703 & Binnen 50 - 300 kN
Recessed Bollards 200 - 500 kN
Welded Mooring Pins & Barge Holders
Structural Tie Bars
ASDO Structural Tie Bar Systems
System ASDO-S, ASDO-E
ASDO Cross Bracing
Compression Struts ASDO-D
Bowstring trusses
Structural Tie Bars for bridges
CAD-DATA ASDO TIE BAR SYSTEMS
2D COMPONENTS
3D COMPONENTS
bocad
Tekla Structures
Shackles for Heavy Lifting and Mooring
Shackles for Heavy Lifting
Shackles for Long Term Mooring
Shackle Quality and Certification
Heavy Machinery Parts
Piston rod blanks
Heavy special bolts
Upset forged parts / Flanged shaft
Tension rods
Bending components
Anchors for Geotechnics
Micropiles
References
Marine Project References
Dublin Port
Liverpool 2 Container Port, UK
Felixstowe Berth 9 Extension, UK
Aqaba Container Port, Jordanien
London Gateway, UK
Port Autonome Le Havre, Frankreich
Nigg Energy Park, UK
Structure Project References
Bicycle bridge at Tessenderlo, Belgium
Viaduct over the Genil River / Granada A-44 Albolote - Santa Fe
Be‘er Sheva University Bridge
Wolverhampton Football Club, UK
Hangers for the Schnettkerbruecke
Manchester City Football Club, UK
London Cannon Place, UK
Shoreditch Bridge, UK
Madrid District Heating, Spanien
Company
Production program
Qualitymanagement
History
ASDO contacts
Partner
News
ASDO Technical note - Threads
ASDO Diaphragm Wall inserts
100 years of Anker Schroeder 1990-1999
100 years of Anker Schroeder 1980-1989
Vaccination against COVID-19
ASDO Technical note - Castings
100 years of Anker Schroeder 1970-1979
100 years of Anker Schroeder, cont'd 1960 - 1969
Tie rods for Dublin Port
Full scale tie rod testing by Anker Schroeder
Level 2 NDT welding inspectors certified to EN 473
ASDO Forgings
ASDO History 1950 - 1959
10 Year Celebrations
Karl-Heinz Bolte - 40 years of reliable and valued effort
Anniversary 100 Years of Anker Schroeder (1940-1949)
ASDO remains fully operational to service your needs!
100 years of Anker Schroeder (1930-1939)
Congratulations to Stephan Lerche for obtaining his Master of Science in Mechanical Engineering
Anniversary 100 Years of Anker Schroeder
MR. JEAN-FRANÇOIS GARCIA JOINED THE ASDO TEAM
CAD Integration in AVEVA bocad and Tekla
EN 1090-2
Contact
You are here:
Products - Anker Schroeder | EN
Directions
Directions to Anker Schroeder
Anker Schroeder ASDO GmbH
Hannöversche Straße 48
44143 Dortmund
Germany
If approaching from the North-East (via A1/A2)
At motorway intersection Kamener Kreuz take the A2 in the direction Oberhausen;
leave the motorway at the exit Dortmund Nord-Ost and follow the B236 towards the south in the direction of Schwerte.
At exit Dortmund-Wambel turn right and then immediately right again.
At the traffic light in front of the Thyssen-Krupp factory gate turn left onto Rüschebrinkstraße.
At the next traffic light turn right onto Hannöversche Straße.
After some meters you pass the TOTAL station;
after 250 meters you reach ASDO on the right side.
If approaching from the East (via A44)
Follow the B1 direction Dortmund; pass the airport and continue towards the west.
On the left side you will see the
ADAC-Building
;
there you turn in the direction of
Lünen
passing a 1400 m long tunnel
and leave at the end of the tunnel at exit Dortmund-Wambel.
At the traffic light turn left onto Hannöversche Straße.
Once you pass a TOTAL-petrol station, follow the road to pass under a small bridge.
After 250 meters you reach ASDO on the right side.
If approaching from the South (via A1 / A45)
At motorway intersection Westhofer Kreuz take the A1 in the direction of
Bremen
.
leave the motorway at the exit
Schwerte B236
and
turn
right
to the direction of Lünen, at the end of the second tunnel leave the highway at the exit
Dortmund-Wambel
.
At the traffic light
turn left
onto Hannöversche Straße.
Once you pass the TOTAL petrol station, follow the road to pass under a small bridge.
After 250 meters you reach
ASDO
on the right side.
If approaching from the West (via A2)
Leave the motorway at the exit
Dortmund Nord-Ost
and follow the
B236
towards the South to the direction of
Schwerte
.
At the exit
Dortmund-Wambel
take a
right turn
and then
immediately keep right
.
At the
traffic light
in front of the company Thyssen-Krupp
turn left
onto Rüschebrinkstraße.
At the
traffic light
you turn right onto
Hannöversche Straße
.
After some meters you will
pass the TOTAL
petrol station.
After 250 meters you
reach ASDO
on the right side.
If approaching from the West (A40/B1)
Drive in the direction of Dortmund passing the Schnettkerbrücke (ASDO-tension rods)
passing the B1 at the big Westfalenhalle 1 (vertical red ASDO-tension rods)
until you reach the B236. Then drive towards the North in the destination of Lünen.
At the end of the 1400 m long tunnel leave the B236 at the exit
Dortmund-Wambel
.
At the
traffic light
turn
left
onto Hannöversche Straße.
You will pass the TOTAL petrol station and drive trough a small bridge
And after 250 meters you will reach
ASDO
on your
right hand side
.